PA6 Ultramid®B24 N 03 light stabilized polyamide 6 high speed spinning in stock

Ultramid® B24 N 03 is a light stabilized polyamide 6 for the production of bright textile fibers. The polymer is especially suitable for high speed spinning.

BASF Ultramid® Polyamide models

ULTRAMID® B 50H1 NATURAL L PA66/6 FR(30)

ULTRAMID® B 50H1 ORANGE 2232 PA66/6 FR(30)

Ultramid® B24 NE 01 PA6 for compounding

Ultramid® B33 E PA6 of intermediate viscosity for compounding

ULTRAMID® B3EG4 UN PA6-GF20

ULTRAMID®B3EG5 R01 UNCOLORED PA6-GF25

ULTRAMID® B3S Q661 NATURAL PA6

Ultramid® AC24/B-10 G high performance PA6.6/6 Copolymer for engineering plastics applications

Ultramid® AC27/B-10 G high performance PA6.6/6 Copolymer for engineering plastics applications

Ultramid® AC30/B-10 G high performance PA6.6/6 Copolymer for engineering plastics applications

Ultramid® B27 03 PA6 for the production of bright textile and carpet fibers

ULTRAMID® B3ZG4 UNCOLORED PA6-GF20

ULTRAMID® B3G8 UN PA6-GF40

ULTRAMID® B3G10SI UNCOLORED PA6-GF50

ULTRAMID® B3Z BLACK 30464 PA6-I

ULTRAMID®B3ZG7 BLACK 20560 PA6-I-GF35

ULTRAMID®B3ZG7 SC UNCOLORED PA6-GF35

ULTRAMID® B3GM35 BLACK 7755 PA6-(GF15+MF25)

ULTRAMID® B3GM35 EBONY 23227 PA6-(GF15+MF25)

ULTRAMID®B35XG8 BLACK 23359 PA6-GF40

ULTRAMID® B3S FC R01 UNCOLORED PA6

ULTRAMID® B3ZG7 CR BLACK 23273 PA6-I-GF35

ULTRAMID® B 230 NATURAL POLYAMIDE

ULTRAMID® B 50H1 NATURAL POLYAMIDE

Ultramid® B27 E PA6 grade of low viscosity that is well suited for compounding and the production of monofilaments.

Ultramid® B27 E 01 PA6 grade of low viscosity that is well suited for compounding and the production of monofilaments

ULTRAMID® B3EG6 WHITE 7759 PA6-GF30

ULTRAMID® B3WG12 HSP LS BLACK 23189 PA6-GF60

ULTRAMID® B3ZG7 R01 BLACK 6259 PA6-I-GF35

Ultramid® B40 PA6 grade of high viscosity that is well suited for the production of blown and cast film and monofilaments.

ULTRAMID®A3EG7 LS ORANGE 7921B PA66-GF35

Ultramid® B24 N 03 light stabilized PA6 for the production of bright textile fibers. The polymer is especially suitable for high speed spinning.

Ultramid® B33 PA6 grade of intermediate viscosity that is well suited for the production of biaxial oriented and cast film and monofilaments.

ULTRAMID®B3G7 R01 RED 7920 PA6-GF33

ULTRAMID® B3WG6 GIT BLACK 07755 PA6-GF30

Ultramid® B36 PA6 grade of intermediate to high viscosity that is well suited for the production of cast and blown film and monofilaments.

Ultramid® B40 L lubricated PA6 grade of high viscosity that is well suited for the production of blown and cast film and monofilaments.

ULTRAMID® B 216 V30 BLACK POLYAMIDE

ULTRAMID® B 230 GREY 1421 POLYAMIDE

Ultramid® B33 L lubricated PA6 grade of intermediate viscosity that is well suited for the production of biaxial oriented and cast film and monofilaments. 

ULTRAMID®B3WG8 R01 BLACK 23328 PA6-GF40

ULTRAMID® B3ZG6 GB16616-N PA6-GF30

ULTRAMID® 8233G PA6-GF33

Ultramid® B38 Industrial is a PA6 grade of high viscosity that is well suited for the extrusion of tubes, rods, sheets, monofilaments and other industrial extrusion applications

ULTRAMID® B3ZG6 BLACK 30564 PA6-I-GF30

ULTRAMID® B3ZG6 GY6127 PA6-GF30

ULTRAMID® B3M6 UNCOLORED PA6-MD30

Ultramid® B36 L is a lubricated PA6 grade of intermediate to high viscosity that is particularly suitable for cast film, water-cooled blown film, biaxially oriented (double bubble) blown film, sausage casing.

Ultramid B Ccycled Post C2 RCS

ULTRAMID® B 218E V30 BLACK 21N POLYAMIDE

ULTRAMID® B 218 V30 BLACK 21N POLYAMIDE

ULTRAMID® B 50H1 BLACK LBO 0129 POLYAMIDE

ULTRAMID® B3GM35 UNCOLORED Q643 PA6-(GF15+MF25)

ULTRAMID® B3WG13 HPX BLACK 00102 PA6-GF63

ULTRAMID® B3ZG7 OSI BLACK 23273 PA6-GF35

ULTRAMID® B3WGM24 HPX BLACK 23210 PA6-GF10-MD20

ULTRAMID® B3EG6 BLACK 7838 PA6-GF30

Ultramid® B40 LN is a lubricated and nucleated polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film. Clarity and processability are enhanced by the incorporation of nucleating and slip agent.

Ultramid® B36 LN is a lubricated and nucleated polyamide 6 grade of intermediate to high viscosity that is well suited for the production of cast and blown film. Clarity and processability are enhanced by the incorporation of nucleating and slip agent.

Ultramid® B36 LNV is a lubricated and nucleated polyamide 6 grade of intermediate to high viscosity that is well suited for the production of cast and blown film. Clarity and processability are enhanced by the incorporation of nucleating and slip agent. 

Ultramid® B27 03 Ccycled® postC2 is a polyamide 6 for the production of bright textile and carpet fibers. Fossil resource saving product: 100% of the fossil feedstock required for the manufacturing of this product was replaced in the production site by renewable raw materials (REDcert² Certified).

Ultramid® B36 SL is a lubricated polyamide grade of intermediate to high viscosity. It combines the regular mechanical and barrier performance of PA 6 with improved processing behaviour for coextruded, in particular blown films. Furthermore, if offers improved transparency, softness and drawing behavior. 

Ultramid® B36 SLN is a lubricated polyamide grade of intermediate to high viscosity. It combines the regular mechanical and barrier performance of PA 6 with improved processing behaviour for coextruded, in particular blown films. Furthermore, if offers improved transparency, softness and drawing behavior. 

ULTRAMID®B3W BLACK 106 PA6

Ultramid® B24 N 03 Ccycled® postC2 is a light stabilized polyamide 6 for the production of bright textile fibers. The polymer is especially suitable for high speed spinning. Fossil resource saving product: 100% of the fossil feedstock required for the manufacturing of this product was replaced in the production site by renewable raw materials (REDcert² Certified).

ULTRAMID® B3WG13 BLACK 00102 PA6-GF63

Ultramid® B33 L Ccycled® postC2 is a lubricated polyamide 6 grade of intermediate viscosity that is well suited for the production of biaxial oriented and cast film and monofilaments. Fossil resource saving product: 100% of the fossil feedstock required for the manufacturing of this product was replaced in the production site by renewable raw materials (REDcert² Certified).

Ultramid® B40 L Ccycled® postC2 is a lubricated polyamide 6 grade of high viscosity that is well suited for the production of blown and cast film and monofilaments. Fossil resource saving product: 100% of the fossil feedstock required for the manufacturing of this product was replaced in the production site by renewable raw materials (REDcert² Certified).

Ultramid® B27 HM 01 is a low viscosity, heat stabilized, nylon 6 universal wire jacketing resin offering excellent performance through the range of THHN, THWN, and TFFN constructions. It possesses a balance of performance properties including flexibility, toughness and abrasion resistance combined with excellent chemical resistance to gasoline, oil and other hydrocarbons. It is a preferred resin for wire conductor jacketing, including shipboard cable, and non-metallic-sheathed cable primary jacketing.

Ultramid® B36 LNV Ccycled® postC1 is a lubricated and nucleated polyamide 6 grade of intermediate to high viscosity that is well suited for the production of cast and blown film. Clarity and processability are enhanced by the incorporation of nucleating and slip agent. Fossil resource saving product: 100% of the fossil feedstock required for the manufacturing of this product was replaced in the production site by renewable raw materials (REDcert² Certified).

ULTRAMID® ADVANCED N3WG6 LS BLACK 2 3593 POLYAMIDE

Ultramid® B26 C 02

Ultramid® C33 is a PA6/66 grade of intermediate viscosity for the production of mulitlayer film and monofilaments. Ultramid® C33 is well suited for the production of nonsymetric blown film with reduced curl. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.

ULTRAMID® 8202C PA6

Ultramid® C27 is a PA6/66 grade of low viscosity for the production of monofilaments and engineering plastics.

Ultramid® C33 L is a lubricated PA6/66 grade of intermediate viscosity for the production of mulitlayer film. Ultramid® C33 L is well suited for the production of nonsymetric blown film with reduced curl. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.

ULTRAMID® C 216 NATURAL POLYAMIDE

ULTRAMID® C 50H2 NATURAL POLYAMIDE

ULTRAMID® C 52H1 BLACK PA6 FR(30)

ULTRAMID® 8202CHS BLACK 102 PA6

ULTRAMID® 8202CHS PA6

Ultramid® C40 L is a lubricated PA6/66 grade of high viscosity for the production of monofilaments and blown film. Ultramid® C40 L is well suited for the production of high transparency, nonsymetric blown film with reduced curl. Its very low melting point compared to standard PA 6 is advatageous for coextrusion with temperature sensitive polymers like EVOH.

ULTRAMID® 8233G YL6117C PA6-GF33

ULTRAMID® C 216 V15 NATURAL POLYAMIDE

ULTRAMID® C 216 V25 NATURAL POLYAMIDE

ULTRAMID® C 216 V30 NATURAL POLYAMIDE

ULTRAMID® C 216 V45 NATURAL POLYAMIDE

ULTRAMID® C 216 V50 NATURAL POLYAMIDE

ULTRAMID® C 216 V55 BLACK POLYAMIDE

ULTRAMID® C 218L V15 BLACK-J POLYAMIDE

ULTRAMID® C 218L V30 BLACK-J POLYAMIDE

ULTRAMID® C 218 V30 NATURAL POLYAMIDE

ULTRAMID® C 218 V35 NATURAL POLYAMIDE

ULTRAMID® C 218 V45 BLACK POLYAMIDE

ULTRAMID® C 246 V30 BLACK POLYAMIDE

ULTRAMID® C 246 V30 NATURAL POLYAMIDE

ULTRAMID® C 548B V15 BLACK POLYAMIDE

ULTRAMID® C 60X1 V30 BLACK POLYAMIDE

ULTRAMID® C V33W BLACK 6205 POLYAMIDE

ULTRAMID®C 218 V18 BLACK 21N PA6-GF18

Ultramid® C40 LX is a lubricated copolyamide 6/66 grade of high viscosity for the production of monofilaments. Improved transparency and gloss are enhanced by the incorporation of a high dosage of lubricant.

ULTRAMID®C 216 V40 BLACK Z PA6-GF40

ULTRAMID®C 216 V35 BLACK Z PA6-GF35

ULTRAMID® C 216 V15 BLACK 61 POLYAMIDE

ULTRAMID® C 216 V30 GREY 1458 POLYAMIDE

ULTRAMID® C 216 V35 BLACK 21N POLYAMIDE

ULTRAMID® C 216 V40 BLACK Z POLYAMIDE

ULTRAMID® C 218 MV30 BLACK 21N POLYAMIDE

ULTRAMID® C 218 SV30 BLACK 34NG POLYAMIDE

ULTRAMID® C 218 V35 BLACK 21N POLYAMIDE

ULTRAMID® C 218 V50 BLACK 4N POLYAMIDE

ULTRAMID® C 246 V30 GREY 1815 POLYAMIDE

ULTRAMID® C 52G3 MZ25 GREY R7035 POLYAMIDE

Ultramid® C40 L Ccycled® postC2 is a lubricated copolyamide 6/66 grade of high viscosity for the production of monofilaments and blown film. Ultramid® C40 L-CcycledTM postC 2 is well suited for the production of high transparency, nonsymetric blown film with reduced curl. Its very low melting point compared to standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH. Fossil resource saving product: 100% of the fossil feedstock required for the manufacturing of this product was replaced in the production site by renewable raw materials (REDcert² Certified).

Ultramid® C37 LC is a lubricated copolyamide 6/66 grade of high viscosity for the production of mulitlayer film and monofilaments. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH.

ULTRAMID® 8202C WHITE 6463C PA6

ULTRAMID®ENDURE D5G3BM BLACK20560 PA66-GF15

ULTRAMID® C 216 S20 V10 BLACK 21N POLYAMIDE

ULTRAMID® C 52G3 MZ25 GREY RAL 7541U POLYAMIDE

ULTRAMID® C 256 V18 (EX PSB 197) NATURAL POLYAMIDE

Ultramid® C33 LN is a lubricated and nucleated copolyamide 6/66 grade of intermediate viscosity for the production of mulitlayer film. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH. Clarity and processability are enhanced by the incorporation of nucleating and slip agent. 

Ultramid® C40 LN is a lubricated and nucleated copolyamide 6/66 grade of high viscosity for the production of mulitlayer film. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH. Clarity and processability are enhanced by the incorporation of nucleating and slip agent. 

ULTRAMID® CR 52G1 M25 GREY R7035-K PA6-MD25 FR(30)

ULTRAMID® 1C POLYAMIDE

ULTRAMID® A 60G1 V30 NATURAL PA66-GF30 FR(40)

Ultramid® C40 LN Ccycled® postC2 is a lubricated and nucleated copolyamide 6/66 grade of high viscosity for the production of mulitlayer film. Its lower melting point than standard PA 6 is advantageous for coextrusion with temperature sensitive polymers like EVOH. Clarity and processability are enhanced by the incorporation of nucleating and slip agent. Fossil resource saving product: 100% of the fossil feedstock required for the manufacturing of this product was replaced in the production site by renewable raw materials (REDcert² Certified).

ULTRAMID® ADVANCED T1000HG10 LS BLACK 23593 PA6T/6I-GF50

ULTRAMID® ADVANCED T1000HG6 UNCOLORED PA6T/6I-GF30

ULTRAMID® ADVANCED N3WG6 LS BLACK 2 3593 POLYAMID